301668-1-KIT - LONGFIELD HILUX KIT

301668-1-KIT - LONGFIELD HILUX KIT

RRP $1,850.00
Save $0.00 (0%)

SKU: TG-000018

Toyota / Hilux / SOLID AXLE FRONT (1979-1998)

Out Of Stock
One Time Payment
$1,850.00
4 Interest Free Payments of
$462.50
Buy now, pay later Visa, Mastercard, American Express, Afterpay more info...
-
+
  • 14 days no quibbles returns policy*
  • Cheap shipping: we check rates from 7 different carriers and quote the cheapest. Try us out below
Shipping Estimate (Australia only)

Items that are shipped on a pallet can only be shipped to business addresses with forklift access or the carriers local depot for you to pickup

International Shipping Costs available in Checkout

Enquire about this

The Longfield™ Gun Drilled Toyota 30-Spline Birfields are made out of 100% chromoly and are precision polished to remove any imperfections that may cause stress risers. The internals of the birfield are also made from 4340 chromoly and are dual heat treated for superior strength. The birfield has a M8 grease zerk at the end of the stub shaft and is gun drilled through the center of the birfield to allow for grease to pass through the zerk fitting and into the internals. This will save you precious time by eliminating the need to disassemble your axle just to service your birfields.

The Gun Drilled 30-Spline Birfields also have a shallow relief near the splines on the stub shaft known as a Machined Spline Saver. The Machined Spline Saver eliminates stress concentrations caused by grooving from the tool that makes the splines on the stub shaft. The stress concentration from the spline groove is a common failure point on birfield stub shafts.

The axle shafts are also made out of 4340 chromoly steel.

We understand that once you upgrade your axles, the next weak link is your hub gears, so we decided to include our Chromoly Inner and Outer Hub Gears and Creeper Drive Flanges at no additional cost!

Write Your Own Review
You're reviewing:301668-1-KIT - LONGFIELD HILUX KIT

Items that weigh over 30 kg are generally shipped on a skid to comply with workplace health and safety requirements. Suspension kits generally weigh around 100kg so we ship them on a skid so nothing gets lost. We can only ship skids to business addresses with access to forklift or the carriers local depot for you to pickup.

Cancellations
No order may be cancelled, modified or deferred without the prior written consent of the Company (which is at the Company’s sole discretion). If such consent is given it is, at the Company’s election, subject to the Company being reimbursed all losses, including loss of profits, and paid a cancellation fee (being not less than 20% of the invoice price of the Goods).

Goods not returnable: Any goods specially made, including items cut to length. Any goods made, or purchased to a firm and irrevocable order or any goods altered or damaged by the Purchaser cannot be returned under any conditions.

WHEN do items need to be returned by?
Goods must be returned within 14 days of issuance of the Company's written consent.

WHERE do items need to be returned to?
Returned goods shall be returned to the Company's place of trading or such other place nominated by the Company.

HOW do you return items?
Returned Goods must be clearly marked with the Return Authorisation Number or such orther reference provided by the Company.

SHIPPING for returns?
Original shipping rates are not refundable. The customer is reposnsible for packaging and shipping of returned goods. Goods returned in a damaged condition are not refundable.

CREDIT for returns?
Credits for returned goods (net of cancellation fees) shall be made by direct deposit or crediting the credit card used for theoriginal purchase.
Instore return option?
Goods can be returned in person to the Company's trading address in person during normal business hours. 

Packing materials?
Goods shipped for return must be packaged in a similar manner to how it was shipped to you so that damagin in transit does not occur.